how do you install bi xenon 9007 hids?

RyanA · Post by **RyanA** » Thu Feb 02, 2012 1:54 pm

If you decide to bypass the auto headlights, it can be done with a resistor and a relay (if you want automatic instrument illumination) or a switch (if you want to manually turn the instrument illumination on and off). You'll need to access the light sensor by the defrost vent and the parking light wire along with a ground. parts needed would be a little bit of wire, a relay (that has an 87a terminal) and a 1k ohm resistor.

If you are interested in doing this, let me know and I'll make a diagram.

sirricealot · Post by **sirricealot** » Fri Feb 03, 2012 4:40 am

I dont mind the auto lights, its just they never turned on with the car before. they would only turn on when it was dark. now it comes on all the time. I'll deal with it lol

4Door · Post by **4Door** » Fri Feb 03, 2012 7:49 pm

sounds like you may have inadvertently disconnected/over rode the DRL sensor...

sirricealot · Post by **sirricealot** » Sat Feb 04, 2012 4:30 am

4Door;285726 wrote:sounds like you may have inadvertently disconnected/over rode the DRL sensor...

I didnt connect anything other than the hid's.