"Good"..that means GREAT Exhaust Shop for custom exhaust'

16vshelbyz · Post by **16vshelbyz** » Mon Feb 09, 2009 8:31 pm

Could very well be true. I know most inspectors don't give a shit and that included me while I was still inspecting. But since I will be bringing the car in with a downpipe only I think they can probably figure something out.

Mazkid · Post by **Mazkid** » Tue Feb 10, 2009 4:12 am

Never have had a problem with HTP...I've had Matt weld exhaust twice aswell as make a turbo to intercooler piping flange/pipe. I just call him and he tells me when to call back. So I do...go in, he does the work, I watch/learn, everyone wins.

5thgen · Post by **5thgen** » Tue Feb 10, 2009 4:40 am

you should have it made from aluminum from the header back. Aluminum piping is pretty cheap....and you can vband it to any muffler.

There is nothing like taking 2 nuts off to take your whole exhaust off.

Digital Sol · Post by **Digital Sol** » Tue Feb 10, 2009 6:03 am

5thgen;163788 wrote:you should have it made from aluminum from the header back. Aluminum piping is pretty cheap....and you can vband it to any muffler.

There is nothing like taking 2 nuts off to take your whole exhaust off.

thats what i was hoping to do, make things nice and simple in the future', gonna call a few places mentioned tomarrow and try and get something set in stone for this weekend

99SilverCX · Post by **99SilverCX** » Wed Feb 11, 2009 1:39 am

I've had good experience with HTP as well. Matt is a great guy.

However, I've ordered my exhaust throught adrenaline and some other parts, and they are not a bad seller, but I wouldn't let them touch my honda.

Digital Sol · Post by **Digital Sol** » Fri Feb 13, 2009 5:02 pm

any other suggestion's...

cant find the number for twisted metals
bier brothers referred me to a different shop
still no call back from htp

fuckn-a'

JustRob · Post by **JustRob** » Fri Feb 13, 2009 5:05 pm

Digital Sol;164896 wrote:any other suggestion's...

cant find the number for twisted metals
bier brothers referred me to a different shop
still no call back from htp

fuckn-a'

T-Rock :dunno:

As mentioned before, he did great work with my KTeller/Borla setup.

sharpie · Post by **sharpie** » Fri Feb 13, 2009 5:06 pm

Digital Sol;164896 wrote:any other suggestion's...

cant find the number for twisted metals
bier brothers referred me to a different shop
still no call back from htp

fuckn-a'

freds muffler

636 639 1446

Digital Sol · Post by **Digital Sol** » Fri Feb 13, 2009 5:12 pm

JustRob;164897 wrote:T-Rock :dunno:

As mentioned before, he did great work with my KTeller/Borla setup.

sent him a pm

Digital Sol · Post by **Digital Sol** » Fri Feb 13, 2009 5:12 pm

sharpie;164898 wrote:freds muffler

636 639 1446

how do the welds look?

this the place that had no issue not installing a cat etc?